1、适用范围：五金、金属、玻璃、陶瓷、电镀、大理石等材料丝印移印

2、特性：耐冲压、耐折弯、免烘烤自干、耐酒精、耐酸  碱  、耐汽油、耐腐蚀。

3、技术参数：

a.粘度：8000-12000cps；

b.细度：5um↓、光泽：60°↑；

c.干燥条件：自干24小时；

d.铅笔硬度：2h↑；

e.耐酒精：99％乙醇500g力来回超过30次；

f.耐磨：500g力来回超过30次；

g.过网性能：77t-145t网纱；

4、稀释剂  的选择：稀释剂  ：s-3；使用前添加10％-15％的db-01固化剂  效果更好。

5、注意事项：

a.不可与其它油墨混用；

b.使用s-3慢干稀释剂  稀释；

c.加过固化剂  的油墨必须在3小时内用完；

d.密封保存，远离火源。

6、应急处理措施：

备注：由于材料及使用中的变数，可能是结果会有变化，以上数据仅供参考，使用前请自行测试。

1, the scope of application: no halogen ink can be printed, abs, pc, ps, acrylic, metal, electroplating, uv surface.

2, characteristics: medium【敏感词】dry, ethanol, acid resistance.

3, technical parameters:

a. viscosity: 8000-12000cps;

b.: 5um:: gloss, fineness of 60 degrees up;

c. dry conditions: 24 hours from dry;

d. pencil hardness: 2h up;

e. resistance to alcohol: 99％ ethanol 500g force back【敏感词】forth more than 30 times;

f. wear: 500g force back【敏感词】forth more than 30 times;

g. n e t performance: 77t-145t;

4, thinner choice: thinner: s-3; before using the 10％-15％ to add db-01 curing agent better effect.

5, matters needing attention:

a.【敏感词】other printing ink;

b. using s-3 slow dry diluent dilution;

c. plus the curing agent of the ink must be used up within 3 hours;

d. sealed to save, away from the fire source.

6, emergency treatment measures:

a. such as dipped into the eye immediately clear water cleaning, serious medical treatment,

b. fire fighting measures: dry powder, foam fire extinguisher【敏感词】sand.

] note: due to the materials【敏感词】the use of variables, possibly is the change, the above data are for reference only, before using please self testing.