公司库

登录

免费注册

移动网站

Hi,欢迎来到,万通商务网

消息

网站导航

当前位置:首页 > 东莞市常虹塑胶有限公司 > pa6 7335f pa6 美国杜邦
浏览:306次[供应]pa6 7335f pa6 美国杜邦
pa6 7335f pa6 美国杜邦
  • 东莞市常虹塑胶有限公司
  • 信息编号:bh401189142723799
  • 更新时间:2018/8/10 10:43:43
  • 规格:25KG/包
  • 数量:30000公斤
  • 价格:1
  • PA6 7335F,PA6 美国杜邦,PA6
价格说明:以上商品为参考价格,并非原价,该价格可能随着您购买数量不同或所选规格不同而发生变化。由于万通商务网不提供线上交易,最终成交价格,请咨询卖家,以实际成交价格为准。
    企业广播
推广
相关产品
第 7 年vip会员

东莞市常虹塑胶有限公司

  • 0级
  • 主营:
    PA6,PA66,PA46
  • 附近企业:
  • 会员类型:

  • 认证信息:
    工商执照未认证
  • 联系人:
    此会员已经过期,交易有风险
  • 咨询商家:
  • 联系方式:
  • 地址:
    广东东莞东莞市樟木头镇百果洞社区塑胶市场四期十一栋13号
  • 微信扫一扫,我的手机商铺
店内商品搜索
  • 产品名称:
新上架产品
品牌词
  • 产品信息
dupont performance polymers zytel® 7335f nc010 nylon 6 (unverified data**) 物性表 物理性能 额定值 (公制) 额定值 (英制) 测试方法
密度 1.13 g/cc 0.0408 lb/in3 dam; iso 1183
water absorption 3.0 % @temperature 23.0 °c 3.0 % @temperature 73.4 °f equilibrium 50%rh; dam; iso 62, similar to
9.0 % @temperature 23.0 °c 9.0 % @temperature 73.4 °f saturation, immersed; dam; iso 62, similar to
线性成型收缩率 0.0075 cm/cm @thickness 1.60 mm 0.0075 in/in @thickness 0.0630 in dam
0.010 cm/cm @thickness 3.20 mm 0.010 in/in @thickness 0.126 in dam
线性成型收缩率,flow 0.0060 cm/cm @thickness 2.00 mm 0.0060 in/in @thickness 0.0787 in dam; iso 294-4
线性成型收缩率,横向 0.0080 cm/cm @thickness 2.00 mm 0.0080 in/in @thickness 0.0787 in dam; iso 294-4
机械性能 额定值 (公制) 额定值 (英制) 测试方法
抗张强度(屈服) 55.0 mpa @temperature 23.0 °c 7980 psi @temperature 73.4 °f 50%rh; iso 527
90.0 mpa @temperature 23.0 °c 13100 psi @temperature 73.4 °f dam; iso 527
伸长率 (断裂) 9.0 % @temperature 23.0 °c 9.0 % @temperature 73.4 °f dam; nominal; iso 527
15 % @temperature 23.0 °c 15 % @temperature 73.4 °f 50mm/min; dam; iso 527
>= 50 % @temperature 23.0 °c >= 50 % @temperature 73.4 °f 50mm/min; 50%rh; iso 527
>= 50 % @temperature 23.0 °c >= 50 % @temperature 73.4 °f 50%rh; nominal; iso 527
elongation at yield 3.8 % @temperature 23.0 °c 3.8 % @temperature 73.4 °f dam; iso 527
24 % @temperature 23.0 °c 24 % @temperature 73.4 °f 50%rh; iso 527
拉伸模量 1.40 gpa @temperature 23.0 °c 203 ksi @temperature 73.4 °f 50%rh; iso 527
3.60 gpa @temperature 23.0 °c 522 ksi @temperature 73.4 °f dam; iso 527
简支梁无缺口冲击强度 6.00 j/cm2 @temperature -30.0 °c 28.6 ft-lb/in2 @temperature -22.0 °f 50%rh; iso 179/1eu
7.00 j/cm2 @temperature 23.0 °c 33.3 ft-lb/in2 @temperature 73.4 °f dam; iso 179/1eu
11.0 j/cm2 @temperature -30.0 °c 52.3 ft-lb/in2 @temperature -22.0 °f dam; iso 179/1eu
12.0 j/cm2 @temperature 23.0 °c 57.1 ft-lb/in2 @temperature 73.4 °f 50%rh; iso 179/1eu
简支梁缺口冲击强度 0.250 j/cm2 @temperature -30.0 °c 1.19 ft-lb/in2 @temperature -22.0 °f dam; iso 179/1ea
0.300 j/cm2 @temperature -30.0 °c 1.43 ft-lb/in2 @temperature -22.0 °f 50%rh; iso 179/1ea
0.450 j/cm2 @temperature 23.0 °c 2.14 ft-lb/in2 @temperature 73.4 °f dam; iso 179/1ea
1.80 j/cm2 @temperature 23.0 °c 8.57 ft-lb/in2 @temperature 73.4 °f 50%rh; iso 179/1ea
电气性能 额定值 (公制) 额定值 (英制) 测试方法
体积电阻率 1.00e+11 ohm-cm @temperature 23.0 °c 1.00e+11 ohm-cm @temperature 73.4 °f 50%rh; astm d257
1.00e+11 ohm-cm @temperature 23.0 °c 1.00e+11 ohm-cm @temperature 73.4 °f 50%rh; iec 60093
>= 1.00e+15 ohm-cm @temperature 23.0 °c >= 1.00e+15 ohm-cm @temperature 73.4 °f dam; iec 60093
1.00e+17 ohm-cm @temperature 23.0 °c 1.00e+17 ohm-cm @temperature 73.4 °f dam; astm d257
1.00e+17 ohm-cm @temperature 23.0 °c 1.00e+17 ohm-cm @temperature 73.4 °f dam; iec 60093
surface resistance 1.00e+11 ohm @temperature 23.0 °c 1.00e+11 ohm @temperature 73.4 °f 50%rh; astm d257
1.00e+11 ohm @temperature 23.0 °c 1.00e+11 ohm @temperature 73.4 °f 50%rh; iec 60093
1.00e+13 ohm @temperature 23.0 °c 1.00e+13 ohm @temperature 73.4 °f dam; astm d257
介电常数 3.3 @frequency 1.00e+6 hz, temperature 23.0 °c 3.3 @frequency 1.00e+6 hz, temperature 73.4 °f dam; astm d150
3.6 @frequency 100 hz, temperature 23.0 °c 3.6 @frequency 100 hz, temperature 73.4 °f dam; astm d150
3.6 @frequency 1000 hz, temperature 23.0 °c 3.6 @frequency 1000 hz, temperature 73.4 °f dam; astm d150
4.2 @frequency 100 hz, temperature 23.0 °c 4.2 @frequency 100 hz, temperature 73.4 °f dam; iec 60250
介电强度 13.5 kv/mm @thickness 3.20 mm, temperature 23.0 °c 343 kv/in @thickness 0.126 in, temperature 73.4 °f 50%rh; short time; astm d149
16.3 kv/mm @thickness 3.20 mm, temperature 23.0 °c 414 kv/in @thickness 0.126 in, temperature 73.4 °f dam; short time; astm d149
耗散因数 0.010 @frequency 1000 hz, temperature 23.0 °c 0.010 @frequency 1000 hz, temperature 73.4 °f dam; astm d150
0.010 @frequency 100 hz, temperature 23.0 °c 0.010 @frequency 100 hz, temperature 73.4 °f dam; astm d150
0.020 @frequency 1.00e+6 hz, temperature 23.0 °c 0.020 @frequency 1.00e+6 hz, temperature 73.4 °f dam; astm d150
0.030 @frequency 100 hz, temperature 23.0 °c 0.030 @frequency 100 hz, temperature 73.4 °f dam; iec 60250
0.11 @frequency 1.00e+6 hz, temperature 23.0 °c 0.11 @frequency 1.00e+6 hz, temperature 73.4 °f 50%rh; astm d150
0.23 @frequency 1000 hz, temperature 23.0 °c 0.23 @frequency 1000 hz, temperature 73.4 °f 50%rh; astm d150
0.37 @frequency 100 hz, temperature 23.0 °c 0.37 @frequency 100 hz, temperature 73.4 °f 50%rh; astm d150
相比耐漏电起痕指数(cti) 600 v @temperature 23.0 °c 600 v @temperature 73.4 °f dam; iec 60112
热性能 额定值 (公制) 额定值 (英制) 测试方法
线形热膨胀系数 - 流动 500 μm/m-°c @temperature 23.0 - 55.0 °c 278 μin/in-°f @temperature 73.4 - 131 °f dam; astm e 831
500 μm/m-°c @temperature 23.0 - 55.0 °c 278 μin/in-°f @temperature 73.4 - 131 °f dam; iso 11359-1/-2
线性热膨胀系数,横向流动 92.0 μm/m-°c @temperature 23.0 - 55.0 °c 51.1 μin/in-°f @temperature 73.4 - 131 °f dam; astm e 831
92.0 μm/m-°c @temperature 23.0 - 55.0 °c 51.1 μin/in-°f @temperature 73.4 - 131 °f dam; iso 11359-1/-2
熔融温度 221 °c 430 °f 10°c/min; dam; iso 11357-1/-3
载荷下热变形温度(0.46 mpa) 175 °c 347 °f dam; iso 75-1/-2
载荷下热变形温度(1.8 mpa) 65.0 °c 149 °f dam; iso 75-1/-2
可燃性(ul94) hb @thickness 1.50 mm hb @thickness 0.0591 in dam; ul94
hb @thickness 1.50 mm hb @thickness 0.0591 in dam; iec 60695-11-10
加工性能 额定值 (公制) 额定值 (英制) 测试方法
加工(熔体)温度 260 - 280 °c 500 - 536 °f dam
270 °c 518 °f dam; optimum
模具温度 70.0 °c 158 °f dam; optimum
50.0 - 90.0 °c 122 - 194 °f dam
干燥温度 80.0 °c 176 °f dam
干燥时间 2.00 - 4.00 hour 2.00 - 4.00 hour dam
水分含量 <= 0.20 % <= 0.20 % dam
材料描述 测试方法
添加剂  lubricant dam
外观 natural color dam
drying recommended yes, if moisture content of resin exceeds recommended level dam
特性 chemical resistance, good dam
fatigue resistant dam
fuel resistant dam
general purpose dam
grease resistant dam
mold release, good dam
nucleated dam
oil resistant dam
形式 pellets dam
generic nylon 6 dam
material status current dam
部件标识代码 >pa6< iso 11469; dam
polymer family polyamide dam
polymer type pa6 dam
加工方法 injection molding dam
产品分类 unreinforced resins dam
树脂识别 pa6 iso 1043; dam
符合rohs指令 contact manufacturer dam
ultrasonic weldable yes dam
用途 appliance components dam
automotive applications
以上是东莞市常虹塑胶有限公司厂家直供pa6 7335f pa6 美国杜邦的详细信息,如果您东莞市常虹塑胶有限公司厂家直供pa6 7335f pa6 美国杜邦的价格、厂家、型号、图片有什么疑问, 请 联系供应商 或 请供应商联系我
关于供应商信息

东莞市常虹塑胶有限公司

东莞市常虹塑胶有限公司是一家专业从事塑胶原料销售的企业。公司自成立以来,与众多供货商保持着良好的合作关系,业务遍及全国各地,深受广大客户信赖,在同行中树立了良好的口碑;与客户建立“互信‘互利、互惠、”的长期合作关系;公司以“良好的信誉、充足的货源、诚信的合作”之营销理念为客户提供优质服务,以求更好的发展,共创双赢。 主营产品有: TPU,TPEE,TPV,TPR,TPE,TPX,ABS,E...
企业类型 未提供 统一社会信用代码 91441900MA4WWLEUXC
营业期限 2017-07-25 至 无固定期限 法定代表人/负责人 刘细梅
注册资本 5000万 注册地址 东莞市樟木头镇百果洞社区塑胶市场四期十一栋13号
组织代码 MA4WWLEU-X 登记机关 广东省东莞市工商行政管理局
经营范围 销售:塑胶原料、塑胶辅料、塑胶制品、橡胶制品、化工原料、其他化工产品(以上项目不含危险化学品);货物进出口。
联系人 需求数量 时间描述
暂无产品询价记录
采购商 成交单价(元) 数量 成交时间
暂无购买记录
同行还在看
郑重提示:您在万通商务网上采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布商家负责,请意识到互联网交易中的风险是客观存在的。推荐使用担保交易保障服务或使用第三方担保交易比如支付宝!

手机号

未认证执照
蒋红亮(先生)

在线客服

点击头像与我聊天

按月份分类:
123456789101112
合作代理 | 客服中心 | 帮助信息 | 诚聘英才 | 网站地图 | 百科词库 | 品牌词库 | 加入收藏夹 | 意见反馈 | RSS订阅 | 网站建设
万通商务网(u520.net),专业电子商务免费推广平台,提供一体化的企业采购解决方案
Copyright 2010-2019 © 万通商务网版权所有 湘公网安备 43052302000106号
产品已下架 推荐相关产品 ×